7 Machine
Home / Kawasaki

2" Pipe lift on the 07 750 brute

JHR2010-08-11 14:57:29 +0000 #1
i just put a 2" pipe lift on the front of my brute. It made it really stiff. It seemed like the front end was saggin a little so i figured it would help. Has anyone else done this and will it hurt the ball joints or anything else with it in such a bind?
phreebsd2010-08-11 15:00:42 +0000 #2
tons of folks run that type of mod. you'll be just fine.
bigblackbrute2010-08-11 15:14:56 +0000 #3
ive got a 2inch pipe lift on all four corners of mine and love it. i turned my shocks all the way down after one ride with them up and it made for a better ride with them turned down. i ride hard and havent had any problems out of mine
JHR2010-08-11 15:59:44 +0000 #4
i went ahead and turned my springs all the way down to help some but it has like no give. the only way it will budge is when i stand on the front rack and jump.
bigblackbrute2010-08-11 16:04:06 +0000 #5
wow mines nt quite that stiff.
bayou_boy_222010-08-11 16:21:47 +0000 #6
there is a difference in the 07 springs and the 09 springs. that could be why JHR's is so much stiffer than yours bigblackbrute.
bigblackbrute2010-08-11 17:09:07 +0000 #7
oh yep that could be i did nt knw ther was a difference thanks for that bit of info bayouboy22
JHR2010-08-11 17:15:17 +0000 #8
ya imma go on a ride with emc tomorrow and try it out. But im thinkin that it might be a little much. I might just have to go buy some HL springs instead.
harmonsbrute2010-08-11 18:26:59 +0000 #9
have any pics of this
Polaris4252010-08-11 18:11:51 +0000 #10
you could always cut them down to 1" or 1.5".... Would probably give you the performance you're looking for.
JHR2010-08-11 18:51:30 +0000 #11
i went on a good long ride today and its not that bad. Dont get me wrong its stiff as crap but its nothng i cant handle. Just hard to turn sometimes. I was just worried it would be bad on my ball joints. Its too much of a pain to take em off and cut them in half or i would. The autozone spring compressor worked great taking the stock springs off but i had to go a different route putting them back together with the 2" coupling.

Reply

Name:
Content:


Other posts in this category