7 Machine
Home / Kawasaki

4WD problem

hubbard15062010-08-11 16:19:46 +0000 #1
When I hit the switch from 2wd to 4wd it does nothing.. The 4wd light never comes on and it doesn't lock it in. Would it be the actuator? I figured if it was then the light would say 4wd but it just wouldn't lock in...but idk.
FABMAN2010-08-11 16:22:52 +0000 #2
check the wires under the box fuse. hear are some links to other thread's with similar problem's

www.mudinmyblood.net...howthread.php?t=2074

www.mudinmyblood.net...howthread.php?t=2077
phreebsd2010-08-11 16:52:13 +0000 #3
if you have no flashing, then you have a power issue.
RedneckOfTheWoods2010-08-11 16:52:06 +0000 #4
Mine is a Prarie 360....OK so I have a flashing light, sometimes it shifts, sometimes it doesn't, when it did shift the light stopped flashing and read either 2 or 4wd correctly.

I removed the front actuator, cleaned and re-built it, bench tested it and it (the actuator) is working fine. Now I tested the plug from the switch and I have no power when fliping between 2 & 4. Does it have to be running to work?

I also remember reading about a fuse issue related to the flashing 4X4 light and now I can't find the posting anywhere.

Hep me! Hep me!
FABMAN2010-08-11 17:06:26 +0000 #5
click on the links 2 posts above.

Reply

Name:
Content:


Other posts in this category