7 Machine
Home / Kawasaki

hid??

kawasaki092010-08-11 03:14:43 +0000 #1
wuts goin on guys? well im tryin to install my hids on my 09 brute 750. i my hids from ddm tuning with the wiring harness. i wanna make it where my leds come on low beam and hid on high beam, can anybody help me out??
jctgumby2010-08-11 03:22:39 +0000 #2
www.mudinmyblood.net...light=parking+lights

This will tell you what you need to do to get your lights to work seperately
ranchermoe2010-08-11 03:20:40 +0000 #3
Simple,

just find the high beam wire and use it to trigger the relay,

its easy with a test light.
15brute2010-08-11 04:19:13 +0000 #4
The red/yellow wire is the power to the low beam. You cut that wire and you dont have low beams wich you will not have after doing the HID conversion. Your park lights will come on low beam and your hids and park lights will come on high beam but you will not see the park lights when the hids are on, them suckers are bright!!! Get you some LED park lights from superbright leds.com, they come in all different colors, the ones I used are the 1 watt silver looking bulbs in blue, very nice!!

Reply

Name:
Content:


Other posts in this category