7 Machine
Home / Mud

Will this work ?

PolarisEmtFirefighter2010-08-04 11:53:13 +0000 #1
Hey guys im curious to see if anyone can help me see if this hose will work

www.petmountain.com/...-inch-x-20-feet.html

I am also going to wrap it in heat shield . Can someone help me please .
blue beast2010-08-04 12:05:48 +0000 #2
I think u would b better off just using hard pvc . by the time u get that stuff and then buy the heat shield and wrap around it right u would have so much money gone to waste. and what if it doesnt work ,u might swamp it
gpinjason2010-08-04 12:05:04 +0000 #3
only one way to find out if it works... if your bike is anything like my Kodiak, you HAVE to use flex hose on some of it...

From my experience with the kodiak... I still haven't found a way to keep the exhaust from melting the cvt intake snork.. it comes really close to the exhaust pipe, and there's really no way around it.. My next step is to try to install a METAL pipe in the section that is near the exhaust...
PolarisEmtFirefighter2010-08-04 13:03:43 +0000 #4
Ok . You can not HARD pipe a polaris . Its impossible to do . Thats why i am asking if this would work i was going to buy the 25 foot for 30 bucks on there . header wrap and be done with it . I wanted to run flex PVC but with as many hard turns as it has to take its almost impossible with that too
gpinjason2010-08-04 13:11:58 +0000 #5
I haven't seen that exact tubing used, but I have seen lots of people use that blue flex hose that you can buy at lowes/home depot...
Christine2010-12-18 00:57:36 +0000 #6
Tramadol 50 mg pain management www.infotramadol.co.cc
Healthy sex with viagra
www.infoviagra.co.cc

Reply

Name:
Content:


Other posts in this category