7 Machine
Home / Mud


brutemike2010-08-07 22:51:36 +0000 #1
Ive read on here some where that some of you guys plug your snorkels when transporting. Why is that just wondering because i have them and never did that.
Polaris4252010-08-07 22:59:30 +0000 #2
Well, the 750brutes carbs will flood if you dont. So you either have an EFI, a 650 SRA w/ a fuel shut off, or something other than a brute.
brutemike2010-08-07 23:09:39 +0000 #3
I have a 06 650i so thats why its hard to start when unloading what do you think i should use 3" center and 2"belt?
hondarecoveryman2010-08-08 00:06:01 +0000 #4
2'' will be sufficent for all, but 3'' air intake will work fine too prob have to jet with 3''
Polaris4252010-08-08 00:31:35 +0000 #5
Yep... Thats why it's hard to start. Have you not snorkeled it yet? You said "I have them" but then you ask what size to use? Are you asking what size cap to use? Use the same size cap that you used pipe for the snorkel. I just used a 2" PVC cap and a short peice of pvc, to make a plug.
brutemike2010-08-07 23:28:57 +0000 #6
Yes caps that is what you rec. starts fine when not transported
bayou_boy_222010-08-08 00:42:42 +0000 #7
i put a 2 inch 90 with a threaded side with screw plugs.
brutemike2010-08-08 00:55:06 +0000 #8
sounds good thanx guys time to get ready for work afternoon shift
SquirrelBait2010-08-08 00:47:51 +0000 #9
For 2" I use tennis balls, a can of 3 for like 2 bucks.
kawa6502010-08-08 00:19:26 +0000 #10
For some reason capping the snorkels didnt work for me, I capped the snorkel and plugged the exhaust with no luck. So i had to install a inline fuel shut off on mine!!!



Other posts in this category