7 Machine
Home / Mud

Broken Exhaust stud

bayou_boy_222010-08-15 09:38:21 +0000 #1
Well trying to change out he exhaust on Ryan's brute and the stud that holds the exhaust to the rear head broke off. Did not even take much effort. Found that the stud was already cracked. anyone have any ideas on how to get this

out of the head with out taking the hole thing apart. it is the top bolt on the rear head. I am sure that the stud is lock tighted in. all the other studs on the front and back were changed out to bolts except this one.
phreebsd2010-08-15 09:54:00 +0000 #2
Any left out to grab onto?
bayou_boy_222010-08-15 10:01:48 +0000 #3
one thread.. we started drilling it but the only thing that will fit in there is a drimmel. going to work through the night to try to get this thing going as we are leaving for our ride at red creek on friday.
phreebsd2010-08-15 10:25:31 +0000 #4
good luck brother
bayou_boy_222010-08-15 11:02:14 +0000 #5
just what we needed right before the ride
phreebsd2010-08-15 09:59:30 +0000 #6
YouTube - How to MIG Weld : Removing a Broken Stud for MIG Welding: Video From YouTube:(link)

Reply

Name:
Content:


Other posts in this category